03 May 6 Very Helpful Tips For Doing Water Damage Restoration the Correct Way
Many people underestimate the importance of water. Water is a simple, clear liquid that is essential for all life. Water can also be very destructive. Anyone who has witnessed the effects of a tsunami will know how devastating water can be. Water damage to your home can be stressful, regardless of whether it is a burst pipe, a backed up sewer line, flooding, or any other type of problem. Water damage in your home can cause more problems than it solves.
Water can cause damage to insulation, wood, framing, wiring, and other components of your house. A professional water damage repair team is often required for serious damages. You can take steps to reduce water damage and do your own restorations. It all depends on how much and what type of water damage. Three types of water can cause damage:
- Water that is clean: This water comes from rain and leaky pipes. Normally, moderate water damage can be repaired on your own.
- Gray water: This is caused by flooded appliances such as your dishwasher. It may also contain chemicals or contaminants. You can repair moderate gray water damage yourself if you follow these guidelines.
- Black water: This is caused by backed-up or contaminated water sources. Black water damage can cause serious health problems and should be dealt with by professionals.
6 Water Damage Restoration Tips
Take out affected items
Turn off power, then start removing the affected items. All electronic devices must be unplugged and taken out.
Water damage to an electrical circuit can pose a danger, especially if it has been damaged.
You can also save any affected items if you get rid of them as soon as possible. You can save things like mats and rugs if they are removed quickly and cleaned and disinfected.
Get rid of the water
You must first get rid of any standing water. Any standing water can only slow down your repairs. Any method can be used to get rid of excess water. For small amounts of water, buckets and towels are great.
You may need a wet-dry vacuum for larger volumes. You can usually just dump the water down your main sewer line, provided that the line isn’t clogged or causing the problem. Your water clean up will be completed faster to reduce the likelihood of mold and mildew.
Check for mold and mildew
You should first check for mold or mildew growths. Mold and mildew can form in as little time as 24 hours if the conditions are right, so it is important to inspect quickly.
Mold can cause illness. You can get rid of any moldy material by removing it from your walls, baseboards or drywall. If you are suffering from serious mold problems, it is important to stop airflow and call a professional water damage restoration firm. Mold can also grow in places that are not obvious like the walls and floorboards.
Get an Airflow going
Water damage can be so severe because the water doesn’t have a place to go. It just sits there, decomposing any materials it touches.
After you have cleared away any standing water and checked for signs of mold externally, it is time to open the area as wide as you can and set up an airflow. You can dry any mold or mildew-causing components by blowing them out.
If the water damage is minimal, you can dry the affected areas using a dehumidifier and regular fan.
While it won’t fix everything, it will prevent most of the damage and allow you to make repairs later. You can prevent the worst damage by drying out the area quickly.
Repair damaged components
Even if you quickly dry out the water and get rid of it, some parts may be damaged beyond repair. Water damage to drywall, siding, or baseboards is common. They are easy to repair. You should be careful when replacing or removing structural components from your house if they have been damaged. You can also cause further damage to your home by improperly removing structural parts.
All new materials can be sealed, caulked, and painted
After you’ve replaced damaged materials, it is time to protect them against further water damage. You will need to seal any damaged floorboards or replace them with waterproof materials like vinyl or tile.
The future will be protected by water-resistant floor components. Every fixture that needed to be replaced must be sealed and caulked. To prevent future water leakage, caulk should be used to cover fixtures such as frames, toilets, sinks, windows and frames.
A fresh coat of paint can also add water protection and make the areas that have been damaged look new again.