10 Apr How Do You Do Mold Sampling? When Do You Need It?
Today I’d like to discuss how you do mold sampling. But before I teach you about mold sampling due to the time, the importance is, before you do any sampling, you make sure the sampling device you have (right here is a Bio Pump +)
What you can do with this is you can verify that it’s properly pulling the right amount of volume air. So what you want to do with these buttons here, is click to where it says what type of mode you want. But more importantly, calibrating the pump and then verifying calibration. So we’re going to do that together now.
This is your flow meter. There is a little ball here. It goes up and you want it right in the middle of that green line.
You assemble that onto the pump, you turn it on, it says calibrate pump. As you can see right now, it’s already set from the last time it was verified.
Now you can set it based on the volume you like then you set it and verify it.