Not only can water damage ruin your valuables and furniture, but unfortunately, it can also damage the house – and become a bit costly. If you can act right away, you can help reduce the damage and save some of your belongings.
Don’t Deal With Water Damage Lightly
Even if your basement has just a small amount of water, or even if it’s only moist, it is the ideal terrain for mold. Mold growth destroys walls, furniture, rugs, floor coverings, and so much more. It can also lead to poor air quality which causes respiratory problems, such as asthma or other severe illnesses.
Preventing mold growth is crucial to keeping you homes air clean and healthy. Other than calling your insurance company, here are some other strategies for handling your flooded basement and making the water damage not be as severe. Prior to doing anything at all, call your insurance provider and tell them everything you need to do.
Disconnect the Power
Disconnect all digital devices and eliminate all appliances, furniture and all things which you can move. The quicker you remove items from the water, the more likely you are to save them.
Get rid of all rugs (tapestries and rugs) and underlay mats. You may have the opportunity to save your carpeting if you’ve got them cleaned and disinfected.
Eliminate the Water
There are a handful of ways to eliminate water. You can do use things such as old towels, buckets and brooms to help take in as much water as you can. As long as the sewers in your area are not blocked, you can pour the water down the drain, otherwise, pour it on your yard or other permeable surface.
A wet/dry vacuum can also be used. Getting rid of all of the water and drying the region is the most crucial thing you can do to prevent mold growth.
Move Furniture, Rugs, and All Smaller Objects
Most experienced local water damage experts will suggest that you remove the furniture from the affected area as soon as possible. Take area rugs from the area and bring them outside to dry. You can also use wood block under furniture legs to prevent carpet stains.
Exposed wood furniture to moisture transfers the wood stain to carpet leaving permanent marks. Metal furniture legs can leave rust stains.
Is possible, try and remove smaller objects such as books, toys, tables, and other miscellaneous items from the area.
Dry the Affected Area
Once you’ve mopped up all of the water and extracted water from the carpet using a variety of carpet cleaning methods, use fans and a dehumidifier to assist in drying the area as well. If it does not rain, then leave the windows open to permit air flow and quicker drying. You want the place to dry as fast as possible.
For those who have a finished basement and the drywall was affected, you will most likely need to decrease the areas which were affected by the water since the drywall will crumble and the paper backing is going to most likely be a fantastic source of food for mold.
After drying the region, such as wooden beams, insulation, drywall, etc., a majority of water damage experts will suggest you use a great disinfectant to get rid of any bacteria which might have come through the sewers, bathrooms, etc..
Stop the Growth of Mold
After disinfecting the area, give it an opportunity to dry thoroughly, use the disinfectant along the affected area following the directions. As soon as you apply a thin layer, let it dry right away. Once dry, it creates a thin protective coating on any mold that could grow and it eliminates the spore roots.
Regardless of where it is sprayed, it is most likely going to prevent any mold from growing, thus giving it continued strength. If you’re spraying an entire room, you might think about leasing a fogger in a hardware store. It’s pretty seamless to use and extremely fast.
Discard damaged things correctly Bring what you can into a recycling center and get rid of garbage properly.